MÔ TẢ SẢN PHẨM A+ SERVER 2041M-T2R+B
Key Features
1. Four Six-Core AMD Opteron™ 8000 Series (Socket F) processor support; HT3.0 Link support
2. Up to 256GB 32 DIMMS DDR2 800/667/533/400 SDRAM
3. 2 (x16) PCI-e slots, 1 (x8), 1(x4)(Using x8 Slot) PCI-e, 1 64-bit 133MHz PCI-X
4. 1200W High-efficiency Redundant Power Supply
5. 6 x 3.5" Hot-swap Drives Trays; 6x SATA Hard Drives Supported
Integrated Board Super H8QMi-2 |
Product SKUs | |
AS-2041M-T2R+B | * A+ Server 2041M-T2R+B (Black) |
Motherboard | |
Super H8QMi-2 | |
Processor/Chipset | |
CPU | * Quad 1207-pin Socket F * Supports up to four Six-Core AMD Opteron™ 8000 Series (Socket F) processors * HT3.0 Link support |
Chipset | * nVidia MCP55 Pro * IO 55 * NEC uPD720400 |
System Memory | |
Memory Capacity | * Thirty-two 240-pin DIMM sockets * Supports up to 256 GB DDR2 800/667/533/400 MHz memory * Single or Dual (recommended) channel memory support * For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks |
Memory Type | * DDR2 800/667/533/400MHz* Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | * 256MB, 512MB, 1GB, 2GB, 4GB, 8GB ** |
Memory Voltage | * 1.8V only |
Error Detection | * Corrects single-bit errors * Detects double-bit errors (using ECC memory) |
On-Board Devices | |
SATA | * nVidia MCP55 Pro SATA2 3.0Gbps Controller * 6 SATA2 Ports * nVidia RAID 2.0 * SATA RAID 0, 1, 0+1, 5 JBOD Support |
IPMI | * Support for Intelligent Platform Management Interface v.2.0 * 200-pin IPMI slot * (Optional: AOC-SIMLC R 3.00) * (Optional: AOC-SIM1U+ R 3.00) * RMM (Remote Management Module) * (Card not included) * Note: Dedicated LAN connection is required for KVM-over-LAN function. |
Network Controllers | * Intel® 82546GB Dual Port Gigabit Ethernet Controller * Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Super I/O | * Winbond 83627HG |
VGA | * ATI ES1000 Graphics Controller |
Input / Output | |
SATA | * 6 SATA2 ports |
IDE | * Single EIDE channel support up to two UDMA IDE devices * Supports UDMA Mode 5 * Supports PIO Mode 4 * Supports ATA 100 / 133 |
Floppy | * 1 Floppy port; 1.44 MB support |
LAN | * 2 RJ45 LAN ports |
USB | * Up to 4 USB Ports 2.0/1.1 Compliant * 2 Rear Ports * 2 Internal Headers |
Keyboard / Mouse | * PS/2 keyboard and mouse ports |
Serial Ports | * 1 Fast UART 16550 serial port * 1 Header |
VGA | * 1 VGA port |
System BIOS | |
BIOS Type | * 8Mb Flash EEPROM with AMI® BIOS * SST 49LF080A BIOS Chip |
BIOS Features | * Plug and Play (PnP) * DMI 2.3 * PCI 2.2 * ACPI 2.0/1.0 * USB Keyboard Support * SMBIOS 2.3 |
Chassis | |
Form Factor | * 2U Rackmount |
Model | * SC828TQ-R1200LPB |
Dimensions | |
Height | 3.5" (89mm) |
Width | 17.2" (437mm) |
Depth | 27.75" (708mm) |
Gross Weight | 69 lbs (31.3kg) |
Available Colors | Black |
Front Panel | |
Buttons | • Power On/Off button • System Reset button |
LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power fail LED |
Ports | • 2x USB Ports + DB9 COM Port |
Expansion Slots | |
PCI-Express | * 2 x16 PCI-e Slots * 1 x8 PCI-e Slot * 1 x4 PCI-e Slot (Using x8 Slot) |
PCI-X | * 1 64-bit 133 MHz PCI-X (3.3V) slot * OR 1 SIMLC Slot |
Drive Bays | |
Hot-swap | * 6 x 3.5" SATA Hot-swap drive trays * Supports up to 6x SATA hard drives |
Peripheral Drives | |
DVD-ROM | * Slim 8x DVD, 24x CD, DVD-ROM Drive |
Floppy | * Slim 1.44MB Floppy Drive (Optional) |
SAS / SATA Backplane | |
1x 2U SAS / SATA backplane with Enclosure Management (SGPIO) | |
System Cooling | |
Fans | * 6x 80mm 6500 RPM fans |
Shroud | * 1x Air Shroud |
Power Supply | |
1200W (1 + 1) Redundant high-efficiency power supply w/ PFC | |
AC Voltage | 100 - 240V, 50 - 60Hz, 15 - 6Amp |
+5V | 30 Amp |
+5V standby | 4 Amp |
+12V | 100 Amp |
-12V | 0.6 Amp |
+3.3V | 25 Amp |
PC Health Monitoring | |
CPU | * Monitors CPU Core Voltages, +3.3V, +5V, +12V, +5V Standby, VBAT. * CPU 5-Phase-switching voltage reulator |
FAN | * Total up to 9-fan status tachometer monitoring * Up to nine 3-pin fan headers * Status monitor for speed control * Support 3-pin fans with fan-speed control * Low noise fan speed control |
Temperature | * Monitoring for CPU and chassis environment * CPU Thermal Trip Support * PC Temperature Sensing Logic |
LED | * CPU / System Overheat LED * +5V Standby Alert LED |
Other Features | * Chassis Intrusion Detection * Chassis Intrusion Header |
Operating Environment / Compliance | |
Environmental Specifications | * Operating Temperature: 10°C to 35°C (50°F to 95°F) * Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Parts List |
|||
Parts List - (Items Included) | |||
Part Number | Qty | Description | |
Motherboard / Chassis | MBD-H8QMi-2-O-P | 1 | Super H8QMi-2 Motherboard |
CSE-828TQ-R1200LPB | 1 | 2U Black Chassis | |
Air Shroud | MCP-310-82801-0N | 1 | 2U Air Shroud |
Backplane | BPN-SAS-828TQ | 1 | SAS / SATA Backplane |
Cable(s) | CBL-0157L-01 | 2 | 8-pin to 8-pin Ribbon Cable for SGPIO |
CBL-0222L | 1 | 65cm 16-pin to 16-pin Front Flat Cable | |
CBL-0226L | 3 | 43cm Round SATA Cable | |
CBL-0228L | 3 | 55cm Round SATA Cable | |
CD | CDR-A+NVDA2 | 1 | Driver CD |
Drive Tray(s) | MCP-220-00001-01 | 6 | Black Hot-swappable Hard Drive Tray |
MCP-220-00007-01 | 1 | Black USB Assembly Tray | |
Fan(s) | FAN-0099L | 6 | 80mm x 38mm 6500RPM Cooling Fan |
Front Panel | MCP-280-82801-0N | 1 | Front Control Panel Board |
Heatsink / Retention | SNK-P0023P+ | 4 | Please refer to our Thermal Components Matrix |
I/O | CS-PT55L | 1 | Dual LAN I/O Shield |
Mounting Rails | MCP-290-00053-0N | 1 | 26.5" to 36.4" rail set, quick/quick, default for 2U, 3U 17.2" W chassis |
Peripheral Drives | DVM-PNSC-824B | 1 | Black Panasonic 8x DVD, 24x CD, DVD-ROM Drive |
Power Supply | PWS-1K22-1R | 2 | 1200W Redundant Power Supply |
PDB-PT828-8824 | 1 | Power Distributor |