Key Features
1. Intel® Xeon® processor E5-2600 family; QPI up to 8GT/s
2. Up to 768GB DDR3 1600MHz ECC Registered DIMM; 24x DIMM sockets
* Depends on memory configuration
3. 2x PCI-E 3.0 x16 slots
(support 2x GPU/Xeon Phi cards, opt.),
4x PCI-E 3.0 x8 slots
4. Intel® X540 Dual port 10GBase-T
5. I/O ports: 2x 10Gb LAN, 1x Dedicated LAN for IPMI Remote Management, 1x VGA, 1x COM port, 2x USB 2.0
6. 8x 3.5" Hot-swap Drive Bays and 2x 5.25" Peripheral Drive Bays
7. 4x middle fans & 2x rear exhaust fans
8. 1280W Redundant Power Supplies Platinum Level (94%)
9. Battery Backup Power (optional, PWS-1K03B-1R)
|
Integrated Board Super X9DR7-TF+ |
Available Color: Black
* Drivers & Utilities * BIOS * IPMI * Tested MEM * Tested HDD * Manuals
* OS Certification Matrix * Compatible GPU List
Product SKUs | |
SYS-6037R-72RFT+ | * SuperServer 6037R-72RFT+ (Black) |
Motherboard | |
Super X9DR7-TF+ | |
Processor/Cache | |
CPU | * Intel® Xeon® processor E5-2600 (up to 135W TDP *) * Dual Socket R (LGA 2011) |
Cache | * Up to 20MB |
System Bus | * QPI up to 8 GT/s |
GPU/Xeon Phi Support | * M2050/M2070(Q), up to 135W CPU at 30°C * M2090, up to 135W CPU at 30°C * K10 (Kepler), up to 135W CPU at 35°C * K20 (Kepler), up to 135W CPU at 30°C * Xeon Phi, up to 135W CPU at 30°C |
System Memory | |
Memory Capacity | * 24x 240-pin DDR3 DIMM sockets * Supports up to 768 GB DDR3 ECC Registered memory (RDIMM) in 24 DIMM sockets * Supports up to 128 GB DDR3 ECC Un-Buffered memory (UDIMM) in 24 DIMM sockets |
Memory Type | * 1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | * 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
Memory Voltage | * 1.5 V, 1.35 V |
Error Detection | * Corrects single-bit errors * Detects double-bit errors (using ECC memory) |
On-Board Devices | |
Chipset | * Intel® C602J Chipset |
SATA | * SATA 2.0 3Gbps with RAID 0, 1, 5, 10 * SATA 3.0 6Gbps with RAID 0, 1, 5, 10 |
SAS | * SAS2 via LSI 2208 * HW RAID 0, 1, 5, 6, 10, 50, 60 support |
IPMI | * Support for Intelligent Platform Management Interface v.2.0 * IPMI 2.0 with virtual media over LAN and KVM-over-LAN support * Nuvoton WPCM450 BMC |
Network Controllers | * Intel® X540 Dual Port 10GBase-T * Virtual Machine Device Queues reduce I/O overhead * Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output * 1x Realtek RTL8201N PHY (dedicated IPMI) |
Graphics | * G200 (Nuvoton WPCM450 BMC with graphic controller) |
Input / Output | |
SATA | * 2 SATA 3.0 ports (6Gbps) * 4 SATA 2.0 ports (3Gbps) |
SAS | * 8x SAS2 ports (6Gbps) |
LAN | * 2x RJ45 10GBase-T ports * 1 RJ45 Dedicated IPMI LAN port |
USB | * 9x USB 2.0 ports total (4x rear + 4x via header + 1x Type A) |
Video | * 1x VGA port |
Serial Port / Header | * 2x Fast UART 16550 ports: 1 rear and 1 header |
Chassis | |
Form Factor | * 3U Rackmount |
Model | * CSE-835BTQ-R1K28B |
Dimensions | |
Width | * 17.2" (437mm) |
Height | * 5.2" (132mm) |
Depth | * 25.5" (648mm) |
Weight | * Gross: 74.8lbs (34kg) / Net: 48lbs (21.8kg) |
Available Color | * Black |
Front Panel | |
Buttons | * Power On/Off button * System Reset button |
LEDs | * Power LED * Hard drive activity LED * 2x Network activity LEDs * System Overheat LED * Power fail LED |
Expansion Slots | |
PCI-Express | * 2x PCI-E 3.0 x16 Full-height Full-length (support 2x GPU/Xeon Phi cards) * 4x PCI-E 3.0 x8 slots * Without GPU installed, can support 5x Full-height Full-length, and 1x half length PCI-E card * With 2x GPU installed, can support 1x Full-height Full-length and 1x Half-length PCI-E cards (both CPUs need to be installed for full access to PCI-E slots. See manual for details) |
Drive Bays | |
Hot-swap | * 8x 3.5" Hot-swap SAS/SATA HDD trays * SAS or enterprise SATA HDD only recommended |
Peripheral Bays | * 2x 5.25" Peripheral Drive Bay |
Backplane | |
1x SAS2 / SATA backplane | |
System Cooling | |
Fans | * 4x 8cm 9.5K RPM, Middle fans * 2x 8cm 6.7K RPM, Rear Exhaust fan |
Power Supply | |
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | |
AC Input | * 1000W Output @ 100-140V, 12-8A, 50-60Hz * 1280W Output @ 180-240V, 8-6A, 50-60Hz |
DC Output | * 1000W: +12V/83A; +5Vsb/4A * 1280W: +12V/106.7A, +5Vsb/4A |
Certification | Platinum Certified [ Test Report ] |
System BIOS | |
BIOS Type | * 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | * Plug and Play (PnP) * APM 1.2 * PCI 2.2 * ACPI 1.0 / 2.0 * USB Keyboard support * SMBIOS 2.3 * UEFI |
Operating Environment / Compliance | |
RoHS | * RoHS Compliant |
Environmental Spec. | * Operating Temperature: 10°C to 35°C (50°F to 95°F) * Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Parts List |
|||
Parts List - (Items Included) | |||
Part Number | Qty | Description | |
Motherboard / Chassis | MBD-X9DR7-TF+ | 1 | Super X9DR7-TF+ Motherboard |
CSE-835BTQ-R1K28B | 1 | 3U Chassis | |
Backplane | CSE-SAS-833TQ-O-P | 1 | SAS833 BACK PANEL WITH AMI MG9072 |
Cable 1 | CBL-0118L-03 | 2 | Ipass to 4 SATA cable 23CM, W / 25.5cm SB, S, 30AWG |
Heatsink / Retention | SNK-P0048P | 2 | 2U Passive CPU Heat Sink for X9 Generation Motherboards w/ Square ILM |
Power Supply | PWS-1K28P-SQ | 2 | 1U 1280W, redundant single output power supply |
I/O Shield | MCP-260-00042-0N | 1 | STD I/O shield for X9 socket R server MB with Gasket |
Optional Parts List | |||
Part Number | Qty | Description | |
Cable | CBL-0341L | - | 1CH internal 10P to 4P USB 2.0 cable for LCD,DVD, 70cm |
Cable | CBL-0210L | - | FDD, DVD, 4-pin power adapter cable, L=8cm |
DVD Adapter | CDM-USATA-G-O-P | - | Mini-SATA to USB adapter for slim DVD |
DVD ROM | DVM-PNSC-DVD-SBT2 DVM-TEAC-DVD-SBT2 DVM-TEAC-DVD-SBT2 |
- | BLACK PANASONIC SLIM DVD ROM SATA DRIVE ROHS BLACK TEAC SLIM DVD ROM SATA DRIVE ROHS BLACK TEAC SLIM DVD ROM SATA DRIVE ROHS |
Battery Backup Power | PWS-1K03B-1R | - | Power Battery Pack, QTY 1; DC 1KW battery back up power supply size same PWS-1K41P-1R with 23pair pin out. |
Dummy Assembly | MCP-240-00096-0N | - | If only one GPU installed, use one dummy for thermal SC747B GPU / Add-on Card Dummy Assembly (2 Slots)-Single Pack |
Optional Parts List (Complete Kit For GPU/Xeon Phi Support) | |||
Part Number | Qty | Description | |
Complete GPU/Xeon Phi Kit (use this for GPU/Xeon Phi support or 3 parts list below) |
MCP-420-83502-0N | - | GPU complete KIt that includes GPU 1x air shroud, 1x GPU Fan Kit, 2x Extension cables |
Cable | CBL-0424L | - | Optional Power cable GPU suport, QTY 2 8+6pin GPU power extension from PDB regular 8pin, 40cm |
Air Shroud | MCP-310-83503-0B | - | Optional GPU air shroud, QTY 1 |
Fan | MCP-320-00046-0N-KIT | - | Optional rear Exhaust Fan for GPU, QTY 1, plugged into fan header FanC after MB enables this Fan header; Rear fan kit (8.2K RPM fan) for SC747B, 835X, 836BH |