SUPERSERVER 6018R-MTR
Key Features
1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
2. Up to 512GB ECC DDR4, up to 2133MHz; 8x DIMM sockets
3. 1x PCI-E 3.0 x8 FHHL Expansion slot
4. Intel® i210 Dual port Gigabit Ethernet
5. IPMI 2.0 + KVM with Dedicated LAN
6. 4x 3.5" Hot-swap SATA3 HDD Bays
7. I/O ports: 2x SuperDOM, 1x VGA, 1x COM, 2x USB 3.0, 2x USB 2.0
8. 400W Redundant Power Supplies Gold Level Certified
Integrated Board Super X10DRL-i |
Product SKUs | |
SYS-6018R-MTR | * SuperServer 6018R-MTR (Black) |
Motherboard | |
Super X10DRL-i | |
Processor/Cache | |
CPU | * Intel® Xeon® processor E5-2600 v3 family (up to 135W TDP **) * Dual Socket R3 (LGA 2011) |
Cores / Cache | * Up to 18 Cores / Up to 45MB Cache |
System Bus | * QPI up to 9.6 GT/s |
Note | ** Please contact your Supermicro sales representative for additional details. |
System Memory | |
Memory Capacity | * 8x 288-pin DDR4 DIMM sockets * Up to 512GB ECC LRDIMM, 256GB ECC RDIMM |
Memory Type | * 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | * RDIMM: 32GB, 16GB, 8GB, 4GB * LRDIMM: 64GB, 32GB |
Memory Voltage | * 1.2 V |
Error Detection | * Corrects single-bit errors |
On-Board Devices | |
Chipset | * Intel® C612 Express chipset |
SATA | * I-SATA 4 & I-SATA 5 support SATA DOM * SATA3 (6Gbps); RAID 0, 1, 5, 10 |
IPMI | * Support for Intelligent Platform Management Interface v.2.0 * IPMI 2.0 with virtual media over LAN and KVM-over-LAN support * ASPEED AST2400 BMC |
Network Connectivity | * Intel® i210 Gigabit Ethernet controller * Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output * 1x Realtek RTL8211E PHY (dedicated IPMI) |
Graphics | * ASPEED AST2400 BMC |
Input / Output | |
SATA | * 4x SATA3 (6Gbps) ports |
LAN | * 2x RJ45 Gigabit Ethernet LAN ports * 1x RJ45 Dedicated IPMI LAN port |
USB | * 2x USB 3.0 ports (rear) * 2x USB 2.0 ports (rear) * 1x Type A |
Video | * 1x VGA Connector |
Serial Port / Header | * 2x Fast UART 16550 port / 1 Header |
DOM | * 2x SATA DOM (Disk on Module) ports |
Chassis | |
Form Factor | * 1U Rackmount |
Model | * CSE-813MFTQ-R400CB |
Dimensions and Weight | |
Width | 17.2" (437mm) |
Height | 1.7" (43mm) |
Depth | 19.8" (503mm) |
Gross Weight | 38 lbs (17.24kg) |
Available Color | Black |
Front Panel | |
Buttons | * Power On/Off button * System Reset button |
LEDs | * Power LED * Hard drive activity LED * 2x Network activity LEDs * Universal Information (UID) LED |
Expansion Slots | |
PCI-Express | * 1x PCI-E 3.0 x8 Full-height Half-length |
Drive Bays | |
Hot-swap | * 4x 3.5" Hot-swap SATA HDD trays |
Backplane | |
1U SATA/SAS HDD Backplane | |
System Cooling | |
Fans | * 4x 4cm 17.5K RPM PWM fans |
Power Supply | |
400W (1+1) Redundant SuperCompact Short-depth AC-DC Gold-level power supply with PMBus and I2C | |
AC Input | 400W: 100-240 V, 50-60 Hz, 6-3 Amp |
DC Output +5V standby |
3 Amp |
DC Output +12V |
33 Amp |
With Power Distributor | +5V: 25 Amp +3.3V: 25 Amp -12V: 0.6 Amp |
System BIOS | |
BIOS Type | * 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | * Plug and Play (PnP) * APM 1.2 * PCI 2.3 * ACPI 3.0 / 4.0 * USB Keyboard support * SMBIOS 2.7.1 * UEFI 2.3.1 |
Operating Environment / Compliance | |
RoHS | * RoHS Compliant |
Environmental Spec. | * Operating Temperature: 5°C to 40°C (41°F to 104°F) * Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Parts List |
|||
Parts List | |||
Part Number | Qty | Description | |
Motherboard / Chassis | MBD-X10DRL-i | 1 | Super X10DRL-i Motherboard |
CSE-813MFTQ-R400CB | 1 | 1U Chassis | |
Air Shroud | MCP-310-19015-0N | 1 | SC813M,SC113M, DP X9DRL-EF/ X9DRL-7F/ X10DRL-i, X9/X10 mylar air shroud, 12"x10" MB,RoHS/REACH |
Backplane | BPN-SAS-815TQ-O-P | 1 | BPN-SAS-815TQ-O-P |
Cable 1 | CBL-0186L | 1 | SET OF 4 SATA 56/45.5/35/23CM ROUND S-RA. 26AWG |
Cable 2 | CBL-CDAT-0661 | 1 | 8 pin to 8 pin round SGPIO cable, 40cm, 28AWG, pinout 1-1,RoHS/REACH |
Riser Card | RSC-RR1U-E8-O-P | 1 | RSC-RR1U-E8 (Rev 4.00) |
Heatsink / Retention | SNK-P0047PD | 2 | 1U Passive Custom CPU Heat Sink for X9DRL, X10DRL Related Systems |
Power Supply | PWS-406P-1R | 2 | 1U 400W Redundant Short Depth Power Supply |